[RESEND PATCH v5 4/5] ARM: dts: da850-evm: enable cpufreq

From: Bartosz Golaszewski <redacted>

Enable cpufreq-dt support for da850-evm. The cvdd is supplied by the
tps65070 pmic with configurable output voltage. By default da850-evm
boards support frequencies up to 375MHz so enable this operating
point.

Signed-off-by: Bartosz Golaszewski <redacted>
Reviewed-by: Adam Ford <redacted>
---
 arch/arm/boot/dts/da850-evm.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f04bc3e15332..f94bb38fdad9 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts

@@ -191,6 +191,19 @@
 	};
 };
 
+&cpu {
+	cpu-supply = <&vdcdc3_reg>;
+};
+
+/*
+ * The standard da850-evm kits and SOM's are 375MHz so enable this operating
+ * point by default. Higher frequencies must be enabled for custom boards with
+ * other variants of the SoC.
+ */
+&opp_375 {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };

-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel