Re: [PATCH v4 6/6] dt-bindings: fpga: Add bindings for ZynqMP fpga driver
From: Rob Herring <robh@kernel.org>
Date: 2019-03-25 19:18:54
Also in:
linux-devicetree, linux-fpga, lkml
On Thu, Mar 14, 2019 at 07:31:22PM +0530, Nava kishore Manne wrote:
Add documentation to describe Xilinx ZynqMP fpga driver
bindings.
Signed-off-by: Nava kishore Manne <redacted>
---
Changes for v4:
-Modified binding description as suggested by Moritz Fischer.
Changes for v3:
-Removed PCAP as a child node to the FW and Created
an independent node since PCAP driver is a consumer
not a provider.Huh? It was the fpga-regions that I suggested should perhaps be at the top-level. As long as pcap is a function exposed by the firmware it should be a child of it.
quoted hunk ↗ jump to hunk
.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txtdiff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt new file mode 100644 index 000000000000..6d7f10775d9b --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt@@ -0,0 +1,11 @@ +Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager. +The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the +Programmable Logic (PL). The configuration uses the firmware interface. + +Required properties: +- compatible: should contain "xlnx,zynqmp-pcap-fpga" + +Example: + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + };-- 2.18.0
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel