Thread (12 messages) 12 messages, 3 authors, 2019-03-21

Re: [PATCH 3/4] ARM: dts: da850-evm: enable cpufreq

From: Bartosz Golaszewski <hidden>
Date: 2019-03-21 16:36:19
Also in: linux-devicetree, lkml

czw., 21 mar 2019 o 16:53 David Lechner [off-list ref] napisał(a):
On 3/21/19 9:10 AM, Bartosz Golaszewski wrote:
quoted
From: Bartosz Golaszewski <redacted>

Enable cpufreq-dt support for da850-evm. The cvdd regulator is fixed
at 1.2V on this board so disable the lower operating points and enable
the 375MHz opp.

The board-da850-evm.c file seems to indicate that this regulator is
variable and comes from the tps65070. This regulator seems to be missing
from the device tree though, even though it has device tree bindings.
Oh snap, you're right. I glanced over the 1.2V comment and thought
it's the same as other boards, but actually it specifies: .min_uV =
950000, .max_uV = 1350000, so all the operating points should work on
that one.

Bart
Cc: Adam Ford

quoted
Signed-off-by: Bartosz Golaszewski <redacted>
---
  arch/arm/boot/dts/da850-evm.dts | 30 ++++++++++++++++++++++++++++++
  1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f04bc3e15332..f63867692da4 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -151,6 +151,15 @@
                      system-clock-frequency = <24576000>;
              };
      };
+
+     cvdd: regulator0 {
+             compatible = "regulator-fixed";
+             regulator-name = "cvdd";
+             regulator-min-microvolt = <1200000>;
+             regulator-max-microvolt = <1200000>;
+             regulator-always-on;
+             regulator-boot-on;
+     };
  };

  &ecap2 {
@@ -191,6 +200,27 @@
      };
  };

+&cpu {
+     cpu-supply = <&cvdd>;
+};
+
+/*
+ * DA850-EVM has a fixed CVDD of 1.2V - we cannot go below 300MHz or
+ * above 375MHz.
+ */
+
+&opp_100 {
+     status = "disabled";
+};
+
+&opp_200 {
+     status = "disabled";
+};
+
+&opp_375 {
+     status = "okay";
+};
+
  &sata {
      status = "okay";
  };
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help