Re: [PATCH] ARM: dts: imx6qdl-sabresd: change phy-mode to use rgmii-id
From: Fabio Estevam <festevam@gmail.com>
Date: 2019-03-20 12:17:03
Also in:
linux-devicetree, lkml
Hi Steve, On Wed, Mar 20, 2019 at 9:06 AM Steve Twiss [off-list ref] wrote:
The PHY used on the Freescale i.MX6Q/DL SABRE boards is qualified as 'rgmii' instead of 'rgmii-id'. Meaning the RX and TX delays that were
This patch declares it as 'rgmii-id', which contradicts the commit log.
previously added by the MAC when required, but are now provided internally by the PHY (and the MAC should no longer add the RX or TX delays in this case). This patch fixes the network problems seen on the Freescale i.MX6Q/DL
Please provide a Fixes tag. It would be good to know if this fix needs to be applied to older kernels. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel