Thread (8 messages) read the whole thread 8 messages, 2 authors, 2019-03-12

Re: [PATCH v3 1/4] drm: rockchip: introduce rk3066 hdmi

From: Sam Ravnborg <hidden>
Date: 2019-03-03 20:23:21
Also in: dri-devel, linux-devicetree, linux-rockchip, lkml

Hi Johan.

Thanks for this nive driver.
A few review comments follows.

	Sam

On Sat, Mar 02, 2019 at 11:41:13AM +0100, Johan Jonker wrote:
From: Zheng Yang <redacted>

Introduce rk3066 hdmi.
A little more info would be good here.
Do not assume all reader knows as much as you do.
quoted hunk ↗ jump to hunk
Signed-off-by: Zheng Yang <redacted>
Signed-off-by: Johan Jonker <redacted>
---
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
new file mode 100644
index 000000000..3c5b702dc
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -0,0 +1,911 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ *    Zheng Yang <zhengyang@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+#include <drm/drm_probe_helper.h>
Please do not use drmP.h in new files. The usage of drmP.h is deprecated.
Also please sort the include files, but keep the nice grouping.
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#include "rk3066_hdmi.h"
+
+#define DEFAULT_PLLA_RATE 30000000
+
+struct hdmi_data_info {
+	int vic;
vic is used so much. It deserves an explanation.

+	bool sink_is_hdmi;
+	unsigned int enc_in_format;
enc_in_format is in this patch only assinged.
aybe drop it (if not used in later patches)
+	unsigned int enc_out_format;
+	unsigned int colorimetry;
+};
+
+struct rk3066_hdmi_i2c {
+	struct i2c_adapter adap;
+
+	u8 ddc_addr;
+	u8 segment_addr;
The two members above are only used in rk3066_hdmi_i2c_write()
Maybe they can be made local variables?
+	u8 stat;
+
+	struct mutex lock; /*for i2c operation*/
Name the lock after what is protects, to avoid mis-use.
+	struct completion cmp;
cmp is shorthand for "compare" - as we have a command named so.
Find a better name.
+};
+
+struct rk3066_hdmi {
+	struct device *dev;
+	struct drm_device *drm_dev;
The new way to do this is to embed the device.
See latest patches by Noralf in drm-misc-next, which include a nice example.
+	struct regmap *regmap;
+1 for using regmap.
But then there is still several readl_relaxed() writel_relaxed() calls?
They are in hdmi_readb() and hdmi_writeb(). Should a regmap had been used here too?
+	int irq;
+	struct clk *hclk;
+	void __iomem *regs;
+
+	struct drm_connector connector;
+	struct drm_encoder encoder;
+
+	struct rk3066_hdmi_i2c *i2c;
+	struct i2c_adapter *ddc;
+
+	unsigned int tmdsclk;
+
+	struct hdmi_data_info hdmi_data;
+	struct drm_display_mode previous_mode;
+};
+
+#define to_rk3066_hdmi(x) container_of(x, struct rk3066_hdmi, x)
+
+static inline u8 hdmi_readb(struct rk3066_hdmi *hdmi, u16 offset)
+{
+	return readl_relaxed(hdmi->regs + offset);
+}
+
+static inline void hdmi_writeb(struct rk3066_hdmi *hdmi, u16 offset, u32 val)
+{
+	writel_relaxed(val, hdmi->regs + offset);
+}
+
+static inline void hdmi_modb(struct rk3066_hdmi *hdmi, u16 offset,
+			     u32 msk, u32 val)
+{
+	u8 temp = hdmi_readb(hdmi, offset) & ~msk;
+
+	temp |= val & msk;
+	hdmi_writeb(hdmi, offset, temp);
+}
+
+static void rk3066_hdmi_i2c_init(struct rk3066_hdmi *hdmi)
+{
+	int ddc_bus_freq;
+
+	ddc_bus_freq = (hdmi->tmdsclk >> 2) / HDMI_SCL_RATE;
+
+	hdmi_writeb(hdmi, HDMI_DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
+	hdmi_writeb(hdmi, HDMI_DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
+
+	/* Clear the EDID interrupt flag and mute the interrupt */
+	hdmi_modb(hdmi, HDMI_INTR_MASK1, HDMI_INTR_EDID_MASK, 0);
+	hdmi_writeb(hdmi, HDMI_INTR_STATUS1, HDMI_INTR_EDID_MASK);
+}
+
+static inline u8 rk3066_hdmi_get_power_mode(struct rk3066_hdmi *hdmi)
+{
+	return hdmi_readb(hdmi, HDMI_SYS_CTRL) & HDMI_SYS_POWER_MODE_MASK;
+}
+
+static void rk3066_hdmi_set_power_mode(struct rk3066_hdmi *hdmi, int mode)
+{
+	u8 current_mode, next_mode;
+	u8 i = 0;
+
+	current_mode = rk3066_hdmi_get_power_mode(hdmi);
+
+	dev_dbg(hdmi->dev, "mode         :%d\n", mode);
+	dev_dbg(hdmi->dev, "current_mode :%d\n", current_mode);
+
+	if (current_mode == mode)
+		return;
+
+	do {
+		if (current_mode > mode)
+			next_mode = current_mode / 2;
+		else {
+			if (current_mode < HDMI_SYS_POWER_MODE_A)
+				next_mode = HDMI_SYS_POWER_MODE_A;
+			else
+				next_mode = current_mode * 2;
+		}
+
+		dev_dbg(hdmi->dev, "%d: next_mode :%d\n", i, next_mode);
+
+		if (next_mode != HDMI_SYS_POWER_MODE_D) {
+			hdmi_modb(hdmi, HDMI_SYS_CTRL,
+				  HDMI_SYS_POWER_MODE_MASK, next_mode);
+		} else {
+			hdmi_writeb(hdmi, HDMI_SYS_CTRL,
+				    HDMI_SYS_POWER_MODE_D |
+				    HDMI_SYS_PLL_RESET_MASK);
+			usleep_range(90, 100);
+			hdmi_writeb(hdmi, HDMI_SYS_CTRL,
+				    HDMI_SYS_POWER_MODE_D |
+				    HDMI_SYS_PLLB_RESET);
+			usleep_range(90, 100);
+			hdmi_writeb(hdmi, HDMI_SYS_CTRL,
+				    HDMI_SYS_POWER_MODE_D);
+		}
+		current_mode = next_mode;
+		i = i + 1;
+	} while ((next_mode != mode) && (i < 5));
+
+	/*
+	 * When IP controller haven't configured to an accurate video
+	 * timing, DDC_CLK is equal to PLLA freq which is 30MHz,so we
+	 * need to init the TMDS rate to PCLK rate, and reconfigure
+	 * the DDC clock.
+	 */
+	if (mode < HDMI_SYS_POWER_MODE_D)
+		hdmi->tmdsclk = DEFAULT_PLLA_RATE;
+}
+
+static int
+rk3066_hdmi_upload_frame(struct rk3066_hdmi *hdmi, int setup_rc,
+			 union hdmi_infoframe *frame, u32 frame_index,
+			 u32 mask, u32 disable, u32 enable)
+{
+	if (mask)
+		hdmi_modb(hdmi, HDMI_CP_AUTO_SEND_CTRL, mask, disable);
+
+	hdmi_writeb(hdmi, HDMI_CP_BUF_INDEX, frame_index);
+
+	if (setup_rc >= 0) {
+		u8 packed_frame[HDMI_MAXIMUM_INFO_FRAME_SIZE];
+		ssize_t rc, i;
+
+		rc = hdmi_infoframe_pack(frame, packed_frame,
+					 sizeof(packed_frame));
+		if (rc < 0)
+			return rc;
+
+		for (i = 0; i < rc; i++)
+			hdmi_writeb(hdmi, HDMI_CP_BUF_ACC_HB0 + i * 4,
+				    packed_frame[i]);
+
+		if (mask)
+			hdmi_modb(hdmi, HDMI_CP_AUTO_SEND_CTRL, mask, enable);
+	}
+
+	return setup_rc;
+}
+
+static int rk3066_hdmi_config_avi(struct rk3066_hdmi *hdmi,
+				  struct drm_display_mode *mode)
+{
+	union hdmi_infoframe frame;
+	int rc;
+
+	rc = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
+						      &hdmi->connector, mode);
+
+	if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV444)
+		frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
+	else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV422)
+		frame.avi.colorspace = HDMI_COLORSPACE_YUV422;
+	else
+		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
+
+	frame.avi.colorimetry = hdmi->hdmi_data.colorimetry;
+	frame.avi.scan_mode = HDMI_SCAN_MODE_NONE;
+
+	return rk3066_hdmi_upload_frame(hdmi, rc, &frame,
+					HDMI_INFOFRAME_AVI, 0, 0, 0);
+}
+
+static int rk3066_hdmi_config_video_timing(struct rk3066_hdmi *hdmi,
+					   struct drm_display_mode *mode)
+{
+	int value, vsync_offset;
+
+	/* Set detail external video timing polarity and interlace mode */
+	value = HDMI_EXT_VIDEO_SET_EN;
+	value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
+		 HDMI_VIDEO_HSYNC_ACTIVE_HIGH : HDMI_VIDEO_HSYNC_ACTIVE_LOW;
+	value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
+		 HDMI_VIDEO_VSYNC_ACTIVE_HIGH : HDMI_VIDEO_VSYNC_ACTIVE_LOW;
+	value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
+		 HDMI_VIDEO_MODE_INTERLACE : HDMI_VIDEO_MODE_PROGRESSIVE;
+	if (hdmi->hdmi_data.vic == 2 || hdmi->hdmi_data.vic == 3)
+		vsync_offset = 6;
+	else
+		vsync_offset = 0;
+	value |= vsync_offset << 4; 
Replace 4 with HDMI_VIDEO_VSYNC_OFFSET_SHIFT??
+	hdmi_writeb(hdmi, HDMI_EXT_VIDEO_PARA, value);
+
 +
+static int rk3066_hdmi_bind(struct device *dev, struct device *master,
+			    void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = data;
+	struct rk3066_hdmi *hdmi;
+	struct resource *iores;
+	int irq;
+	int ret;
+
+	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	hdmi->dev = dev;
+	hdmi->drm_dev = drm;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iores)
+		return -ENXIO;
+
+	hdmi->regs = devm_ioremap_resource(dev, iores);
+	if (IS_ERR(hdmi->regs))
+		return PTR_ERR(hdmi->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	hdmi->hclk = devm_clk_get(hdmi->dev, "hclk");
+	if (IS_ERR(hdmi->hclk)) {
+		dev_err(hdmi->dev, "unable to get HDMI hclk clock\n");
+		return PTR_ERR(hdmi->hclk);
+	}
+
+	ret = clk_prepare_enable(hdmi->hclk);
+	if (ret) {
+		dev_err(hdmi->dev, "cannot enable HDMI hclk clock: %d\n", ret);
+		return ret;
+	}
+
+	hdmi->regmap =
+		syscon_regmap_lookup_by_phandle(hdmi->dev->of_node,
+						"rockchip,grf");
dev->of_node would be fine here. No reason to go via hdmi->
+	if (IS_ERR(hdmi->regmap)) {
+		dev_err(hdmi->dev, "unable to get rockchip,grf\n");
+		ret = PTR_ERR(hdmi->regmap);
+		goto err_disable_hclk;
+	}
+
+	/* internal hclk = hdmi_hclk / 25 */
+	hdmi_writeb(hdmi, HDMI_INTERNAL_CLK_DIVIDER, 25);
+
+	hdmi->ddc = rk3066_hdmi_i2c_adapter(hdmi);
+	if (IS_ERR(hdmi->ddc)) {
+		ret = PTR_ERR(hdmi->ddc);
+		hdmi->ddc = NULL;
+		goto err_disable_hclk;
+	}
+
+	rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_B);
+	usleep_range(999, 1000);
+	hdmi_writeb(hdmi, HDMI_INTR_MASK1, HDMI_INTR_HOTPLUG);
+	hdmi_writeb(hdmi, HDMI_INTR_MASK2, 0);
+	hdmi_writeb(hdmi, HDMI_INTR_MASK3, 0);
+	hdmi_writeb(hdmi, HDMI_INTR_MASK4, 0);
+	rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_A);
+
+	ret = rk3066_hdmi_register(drm, hdmi);
+	if (ret)
+		goto err_disable_hclk;
+
+	dev_set_drvdata(dev, hdmi);
+
+	ret = devm_request_threaded_irq(dev, irq, rk3066_hdmi_hardirq,
+					rk3066_hdmi_irq, IRQF_SHARED,
+					dev_name(dev), hdmi);
+	if (ret) {
+		dev_err(hdmi->dev,
+			"failed to request hdmi irq: %d\n", ret);
+		goto err_disable_hclk;
+	}
+
+	return 0;
+
+err_disable_hclk:
+	clk_disable_unprepare(hdmi->hclk);
+
+	return ret;
+}
+
+static void rk3066_hdmi_unbind(struct device *dev, struct device *master,
+			       void *data)
+{
+	struct rk3066_hdmi *hdmi = dev_get_drvdata(dev);
+
+	hdmi->connector.funcs->destroy(&hdmi->connector);
+	hdmi->encoder.funcs->destroy(&hdmi->encoder);
I think the destroy() function should not be called directly.
+
+	clk_disable_unprepare(hdmi->hclk);
+	i2c_put_adapter(hdmi->ddc);
+}
+
+static const struct component_ops rk3066_hdmi_ops = {
+	.bind	= rk3066_hdmi_bind,
+	.unbind	= rk3066_hdmi_unbind,
+};
+
+static int rk3066_hdmi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &rk3066_hdmi_ops);
+}
+
+static int rk3066_hdmi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &rk3066_hdmi_ops);
+
+	return 0;
+}
+
+static const struct of_device_id rk3066_hdmi_dt_ids[] = {
+	{ .compatible = "rockchip,rk3066-hdmi",
+	},
MAke this a one-liner.
+	{},
Us { /* sentinal */ }, like most other drivers.
+	.driver = {
+		.name = "rockchip-rk3066hdmi",
Different naming are used for the driver in this file.
Coniser using a macro to align the naming.

+		.of_match_table = rk3066_hdmi_dt_ids,
+	},
+};

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help