[PATCH 01/15] ARM: dts: imx6qdl-fdi-fs700-m60: Use explicit swpad values
flat view
STALE2781d
From: Uwe Kleine-König <hidden>
Date: 2019-02-11 14:22:04
Subsystem:
the rest · Maintainer:
Linus Torvalds
Instead of relying on reset defaults or a bootloader to configure use explicit values for the swpad configuration. Here the reset defaults are used owing to lack of other evidence. Signed-off-by: Uwe Kleine-König <redacted> --- arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index ebe7a8bddf04..208f94be1296 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi@@ -58,9 +58,9 @@ imx6qdl-dfi-fs700-m60 { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */ - MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x0001b0b0 + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b0b0 /* PMIC irq */ + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b0b0 /* MAX11801 irq */ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */ >; };
@@ -114,7 +114,7 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 /* card detect */ >; };
@@ -149,7 +149,7 @@ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0 /* SPI NOR chipselect */ >; }; };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel