[PATCH v2 6/6] ARM: dts: stm32: Add romem and temperature calibration on stm32f429
From: Fabrice Gasnier <hidden>
Date: 2019-02-28 10:21:32
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add & enable stm32 factory-programmed memory. Describe temperature sensor calibration cells. Signed-off-by: Fabrice Gasnier <redacted> --- arch/arm/boot/dts/stm32f429.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8d6f028..8055c98 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi@@ -78,6 +78,19 @@ }; soc { + romem: nvmem@1fff7800 { + compatible = "st,stm32f4-otp"; + reg = <0x1fff7800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ts_cal1: calib@22c { + reg = <0x22c 0x2>; + }; + ts_cal2: calib@22e { + reg = <0x22e 0x2>; + }; + }; + timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel