The LS1028A RDB board features an Atheros PHY connected over
SGMII to the ENETC PF0 (or Port0).  ENETC Port1 (PF1) has no
external connection on this board, so it can be disabled for now.

Signed-off-by: Alex Marginean <redacted>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
---
v2 - added a mdio node as parent for the phy node
v3 - none
v4 - none

 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index fdeb417..f86b054 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts

@@ -71,3 +71,20 @@
 &duart1 {
 	status = "okay";
 };
+
+&enetc_port0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sgmii_phy0: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+	};
+};
+
+&enetc_port1 {
+	status = "disabled";
+};

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel