[PATCH 3/3] arm64: dts: freescale: imx8mq: add clock for GPIO node
From: Anson Huang <hidden>
Date: 2019-02-22 09:43:14
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
i.MX8MQ has clock gate for each GPIO bank, add clock info to GPIO node for clock management. Signed-off-by: Anson Huang <redacted> --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9155bd4..4c1fca9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi@@ -160,6 +160,7 @@ reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller;
@@ -171,6 +172,7 @@ reg = <0x30210000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller;
@@ -182,6 +184,7 @@ reg = <0x30220000 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller;
@@ -193,6 +196,7 @@ reg = <0x30230000 0x10000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller;
@@ -204,6 +208,7 @@ reg = <0x30240000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel