Hi,

On 2019/02/19 4:57, Rob Herring wrote:

On Fri, Feb 08, 2019 at 09:27:29PM +0900, Sugaya Taichi wrote:

quoted

Add DT bindings document for Milbeaut serial driver.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
---
  .../devicetree/bindings/serial/milbeaut-uart.txt    | 21 +++++++++++++++++++++
  1 file changed, 21 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt

diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 0000000..8f61c38
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt

@@ -0,0 +1,21 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- compatible: should be "socionext,milbeaut-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- clocks: phandle to the input clock.
+- interrupt-names: should be "rx", "tx".

Put this next to 'interrupts'

OK, change the order.

quoted

+
+Optional properties:
+- uart-flow-enable: flow control enable.

We already have a standard property for this: auto-flow-control

Okay, I change the property name to "auto-flow-control"

quoted

+
+Example:
+	usio1: usio_uart@1e700010 {

serial@...

I got it.

Thanks,
Sugaya Taichi

quoted

+		compatible = "socionext,milbeaut-usio-uart";
+		reg = <0x1e700010 0x10>;
+		interrupts = <0 141 0x4>, <0 149 0x4>;
+		interrupt-names = "rx", "tx";
+		clocks = <&clk 2>;
+		uart-flow-enable;
+	};
-- 
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel