[PATCH v2 1/5] arm64: dts: sprd: Remove PMIC INTC irq trigger type
From: Baolin Wang <hidden>
Date: 2019-02-13 12:34:19
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The Spreadtrum PMIC INTC controller has no registers to set trigger type, since it is always high level trigger as default. So remove its child devices' irq trigger type setting and change #interrupt-cells to 1. Signed-off-by: Baolin Wang <redacted> --- arch/arm64/boot/dts/sprd/sc2731.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index 82bd642..f2f2aa5 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi@@ -13,7 +13,7 @@ spi-max-frequency = <26000000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <1>; #size-cells = <0>;
@@ -43,14 +43,14 @@ compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc"; reg = <0x280>; interrupt-parent = <&sc2731_pmic>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <2>; }; pmic_eic: gpio@300 { compatible = "sprd,sc27xx-eic"; reg = <0x300>; interrupt-parent = <&sc2731_pmic>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; gpio-controller; #gpio-cells = <2>; interrupt-controller;
@@ -69,7 +69,7 @@ compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc"; reg = <0x480>; interrupt-parent = <&sc2731_pmic>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; #io-channel-cells = <1>; hwlocks = <&hwlock 4>; };
--
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel