[PATCH v2 3/8] ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios
flat view
STALE2795d
REVIEWED: 1 (0M)
From: Bartosz Golaszewski <hidden>
Date: 2019-02-11 10:37:18
Also in:
linux-usb, lkml
Subsystem:
arm port, the rest, ti davinci machine support · Maintainers:
Russell King, Linus Torvalds, Bartosz Golaszewski
Revision v2 of 2 in this series; 1 review trailer.
Revisions (2)
- v1 [diff vs current]
- v2 current
From: Bartosz Golaszewski <redacted> Add lookup entries for the vbus and overcurrent gpios for omapl138-hawk. Signed-off-by: Bartosz Golaszewski <redacted> Reviewed-by: Linus Walleij <redacted> --- arch/arm/mach-davinci/board-omapl138-hawk.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 94c4f126ef86..856c5707bae9 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c@@ -302,6 +302,14 @@ static const short da850_hawk_usb11_pins[] = { -1 }; +static struct gpiod_lookup_table hawk_usb_gpio_lookup = { + .dev_id = "ohci-da8xx", + .table = { + GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0), + GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0), + }, +}; + static int hawk_usb_set_power(unsigned port, int on) { gpio_set_value(DA850_USB1_VBUS_PIN, on);
@@ -390,6 +398,8 @@ static __init void omapl138_hawk_usb_init(void) goto usb11_setup_oc_fail; } + gpiod_add_lookup_table(&hawk_usb_gpio_lookup); + ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); if (ret) { pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel