Re: [PATCH v2 0/7] add support for SAM9X60 pin controller
From: Ludovic Desroches <ludovic.desroches@microchip.com>
Date: 2019-02-06 08:57:18
Also in:
linux-devicetree, linux-gpio, lkml
On Thu, Jan 31, 2019 at 05:18:00PM +0100, Claudiu Beznea - M18063 wrote:
From: Claudiu Beznea <redacted>
Minor comment for patch 1. Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> for the whole series.
This series adds drive strenght and slew rate support for SAMX60's pin controller. For drive strenght we could have 2 values: low, high. For slew rate we could have 2 values: enable, disabled. Besides this I took the chance and adapt the documentation for at91 pinctrl driver. Changes in v2: - s/microchip,sam9x60-pictrl/microchip,sam9x60-pinctrl in patches 3/7, 5/7 Claudiu Beznea (7): pinctrl: at91: add option to use drive strength bits pinctrl: at91: add drive strength support for SAM9X60 pinctrl: at91: add compatibles for SAM9X60 pin controller dt-bindings: add documentation for banks dt-bindings: add bindings for SAM9X60 pinctrl: at91: add slewrate support for SAM9X60 dt-bindings: add documentation for slew rate .../bindings/pinctrl/atmel,at91-pinctrl.txt | 27 ++++- drivers/pinctrl/pinctrl-at91.c | 134 +++++++++++++++++++-- drivers/pinctrl/pinctrl-at91.h | 3 + include/dt-bindings/pinctrl/at91.h | 4 + 4 files changed, 155 insertions(+), 13 deletions(-) -- 2.7.4
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel