Both mt8173 and mt8183 don't have this vld_pa_rng(valid physical address
range) register while mt2712 have. Move it into the plat_data.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 3 ++-
 drivers/iommu/mtk_iommu.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 8d8ab21..2913ddb 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c

@@ -548,7 +548,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
                         upper_32_bits(data->protect_base);
        writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);

-       if (data->enable_4GB && data->plat_data->m4u_plat != M4U_MT8173) {
+       if (data->enable_4GB && data->plat_data->vld_pa_rng) {
                /*
                 * If 4GB mode is enabled, the validate PA range is from
                 * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].

@@ -741,6 +741,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
        .m4u_plat     = M4U_MT2712,
        .has_4gb_mode = true,
        .has_bclk     = true,
+       .vld_pa_rng   = true,
        .larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
 };

diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index b46aeaa..a8c5d1e 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h

@@ -48,6 +48,7 @@ struct mtk_iommu_plat_data {
        /* HW will use the EMI clock if there isn't the "bclk". */
        bool                has_bclk;
        bool                reset_axi;
+       bool                vld_pa_rng;