[PATCH v2 2/2] dt-bindings: edac: Aspeed AST2500
From: Stefan Schaeckeler <hidden>
Date: 2019-01-17 16:40:28
Also in:
linux-aspeed, linux-devicetree, linux-edac, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Stefan M Schaeckeler <sschaeck@cisco.com> Add support for EDAC on the Aspeed AST2500 SoC. Signed-off-by: Stefan M Schaeckeler <sschaeck@cisco.com> --- .../bindings/edac/aspeed-sdram-edac.txt | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
new file mode 100644
index 000000000000..6a0f3d90d682
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt@@ -0,0 +1,25 @@ +Aspeed AST2500 SoC EDAC node + +The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error +correction check). + +The memory controller supports SECDED (single bit error correction, double bit +error detection) and single bit error auto scrubbing by reserving 8 bits for +every 64 bit word (effectively reducing available memory to 8/9). + +Note, the bootloader must configure ECC mode in the memory controller. + + +Required properties: +- compatible: should be "aspeed,ast2500-sdram-edac" +- reg: sdram controller register set should be <0x1e6e0000 0x174> +- interrupts: should be AVIC interrupt #0 + + +Example: + + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + };
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel