[PATCH 4/4] drm/atmel-hlcdc: do not immediately disable planes, wait for next frame
From: Peter Rosin <hidden>
Date: 2019-01-10 15:10:55
Also in:
dri-devel, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for atmel hlcdc, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Manikandan Muralidharan, Dharma Balasubiramani, Linus Torvalds
The A2Q and UPDATE bits have no effect in the channel disable registers. However, since they are present, assume that the intention is to disable planes, not immediately as indicated by the RST bit, but on the next frame shift since that is what A2Q and UPDATE means in the channel enable registers. Disabling the plane on the next frame shift is done with the EN bit, so use that. Signed-off-by: Peter Rosin <redacted> --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index 05519e8c6586..f2f570642f84 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c@@ -728,9 +728,7 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p, /* Disable the layer */ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHDR, - ATMEL_HLCDC_LAYER_RST | - ATMEL_HLCDC_LAYER_A2Q | - ATMEL_HLCDC_LAYER_UPDATE); + ATMEL_HLCDC_LAYER_EN); /* Clear all pending interrupts */ atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel