[PATCH v8 12/26] arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking
From: Julien Thierry <hidden>
Date: 2019-01-08 14:08:32
Also in:
lkml
Subsystem:
arm64 port (aarch64 architecture), extensible firmware interface (efi), the rest · Maintainers:
Catalin Marinas, Will Deacon, Ard Biesheuvel, Linus Torvalds
Instead disabling interrupts by setting the PSR.I bit, use a priority higher than the one used for interrupts to mask them via PMR. When using PMR to disable interrupts, the value of PMR will be used instead of PSR.[DAIF] for the irqflags. Signed-off-by: Julien Thierry <redacted> Suggested-by: Daniel Thompson <redacted> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <redacted> Cc: Ard Biesheuvel <redacted> Cc: Oleg Nesterov <oleg@redhat.com> --- arch/arm64/include/asm/efi.h | 11 ++++ arch/arm64/include/asm/irqflags.h | 123 +++++++++++++++++++++++++++++--------- 2 files changed, 106 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index 7ed3208..134ff6e 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h@@ -44,6 +44,17 @@ #define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) +#define arch_efi_save_flags(state_flags) \ + do { \ + (state_flags) = read_sysreg(daif); \ + } while (0) + +#define arch_efi_restore_flags(state_flags) \ + do { \ + write_sysreg(state_flags, daif); \ + } while (0) + + /* arch specific definitions used by the stub code */ /*
diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index 24692ed..fa3b06f 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h@@ -18,7 +18,9 @@ #ifdef __KERNEL__ +#include <asm/alternative.h> #include <asm/ptrace.h> +#include <asm/sysreg.h> /* * Aarch64 has flags for masking: Debug, Asynchronous (serror), Interrupts and
@@ -36,47 +38,96 @@ /* * CPU interrupt mask handling. */ -static inline unsigned long arch_local_irq_save(void) -{ - unsigned long flags; - asm volatile( - "mrs %0, daif // arch_local_irq_save\n" - "msr daifset, #2" - : "=r" (flags) - : - : "memory"); - return flags; -} - static inline void arch_local_irq_enable(void) { - asm volatile( - "msr daifclr, #2 // arch_local_irq_enable" - : + unsigned long unmasked = GIC_PRIO_IRQON; + + asm volatile(ALTERNATIVE( + "msr daifclr, #2 // arch_local_irq_enable\n" + "nop", + "msr_s " __stringify(SYS_ICC_PMR_EL1) ",%0\n" + "dsb sy", + ARM64_HAS_IRQ_PRIO_MASKING) : + : "r" (unmasked) : "memory"); } static inline void arch_local_irq_disable(void) { - asm volatile( - "msr daifset, #2 // arch_local_irq_disable" - : + unsigned long masked = GIC_PRIO_IRQOFF; + + asm volatile(ALTERNATIVE( + "msr daifset, #2 // arch_local_irq_disable", + "msr_s " __stringify(SYS_ICC_PMR_EL1) ", %0", + ARM64_HAS_IRQ_PRIO_MASKING) : + : "r" (masked) : "memory"); } /* + * Having two ways to control interrupt status is a bit complicated. Some + * locations like exception entries will have PSR.I bit set by the architecture + * while PMR is unmasked. + * We need the irqflags to represent that interrupts are disabled in such cases. + * + * For this, we lower the value read from PMR when the I bit is set so it is + * considered as an irq masking priority. (With PMR, lower value means masking + * more interrupts). + */ +#define _get_irqflags(daif_bits, pmr) \ +({ \ + unsigned long flags; \ + \ + BUILD_BUG_ON(GIC_PRIO_IRQOFF < (GIC_PRIO_IRQON & ~PSR_I_BIT)); \ + asm volatile(ALTERNATIVE( \ + "mov %0, %1\n" \ + "nop\n" \ + "nop", \ + "and %0, %1, #" __stringify(PSR_I_BIT) "\n" \ + "mvn %0, %0\n" \ + "and %0, %0, %2", \ + ARM64_HAS_IRQ_PRIO_MASKING) \ + : "=&r" (flags) \ + : "r" (daif_bits), "r" (pmr) \ + : "memory"); \ + \ + flags; \ +}) + +/* * Save the current interrupt enable state. */ static inline unsigned long arch_local_save_flags(void) { - unsigned long flags; - asm volatile( - "mrs %0, daif // arch_local_save_flags" - : "=r" (flags) + unsigned long daif_bits; + unsigned long pmr; // Only used if alternative is on + + daif_bits = read_sysreg(daif); + + // Get PMR + asm volatile(ALTERNATIVE( + "nop", + "mrs_s %0, " __stringify(SYS_ICC_PMR_EL1), + ARM64_HAS_IRQ_PRIO_MASKING) + : "=&r" (pmr) : : "memory"); + + return _get_irqflags(daif_bits, pmr); +} + +#undef _get_irqflags + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + + flags = arch_local_save_flags(); + + arch_local_irq_disable(); + return flags; }
@@ -85,16 +136,32 @@ static inline unsigned long arch_local_save_flags(void) */ static inline void arch_local_irq_restore(unsigned long flags) { - asm volatile( - "msr daif, %0 // arch_local_irq_restore" - : - : "r" (flags) - : "memory"); + asm volatile(ALTERNATIVE( + "msr daif, %0\n" + "nop", + "msr_s " __stringify(SYS_ICC_PMR_EL1) ", %0\n" + "dsb sy", + ARM64_HAS_IRQ_PRIO_MASKING) + : "+r" (flags) + : + : "memory"); } static inline int arch_irqs_disabled_flags(unsigned long flags) { - return flags & PSR_I_BIT; + int res; + + asm volatile(ALTERNATIVE( + "and %w0, %w1, #" __stringify(PSR_I_BIT) "\n" + "nop", + "cmp %w1, #" __stringify(GIC_PRIO_IRQOFF) "\n" + "cset %w0, ls", + ARM64_HAS_IRQ_PRIO_MASKING) + : "=&r" (res) + : "r" ((int) flags) + : "memory"); + + return res; } #endif #endif
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel