[PATCH 3/4] usb: musb: Move musbhsdma macro definition to musb_dma.h
From: <hidden>
Date: 2018-12-27 07:35:26
Also in:
linux-devicetree, linux-mediatek, linux-usb, lkml
Subsystem:
musb multipoint high speed dual-role controller, the rest, usb subsystem · Maintainers:
Bin Liu, Linus Torvalds, Greg Kroah-Hartman
From: Min Guo <redacted> Because the MediaTek musb controller dose not have a separate DMA interrupt, these macros are required to access the dma registers Signed-off-by: Min Guo <redacted> --- drivers/usb/musb/musb_dma.h | 6 ++++++ drivers/usb/musb/musbhsdma.c | 7 +------ 2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 8f60271..281e75d3 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h@@ -35,6 +35,12 @@ * whether shared with the Inventra core or separate. */ +#define MUSB_HSDMA_BASE 0x200 +#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) +#define MUSB_HSDMA_CONTROL 0x4 +#define MUSB_HSDMA_ADDRESS 0x8 +#define MUSB_HSDMA_COUNT 0xc + #define DMA_ADDR_INVALID (~(dma_addr_t)0) #ifdef CONFIG_MUSB_PIO_ONLY
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index a688f7f..824adcb 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c@@ -10,12 +10,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include "musb_core.h" - -#define MUSB_HSDMA_BASE 0x200 -#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) -#define MUSB_HSDMA_CONTROL 0x4 -#define MUSB_HSDMA_ADDRESS 0x8 -#define MUSB_HSDMA_COUNT 0xc +#include "musb_dma.h" #define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \ (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel