[PATCH V5 4/4] ARM64: dts: imx: add i.MX8QXP thermal support
From: Anson Huang <hidden>
Date: 2018-12-20 09:08:58
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Add i.MX8QXP CPU thermal zone support. Signed-off-by: Anson Huang <redacted> --- No change since V4. --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9b08688..48f622c 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi@@ -9,6 +9,7 @@ #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/pads-imx8qxp.h> +#include <dt-bindings/thermal/thermal.h> #include "imx8-ca35.dtsi"
@@ -87,6 +88,12 @@ rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; + + tsens: thermal-sensor { + compatible = "fsl,imx8qxp-sc-thermal"; + tsens-num = <1>; + #thermal-sensor-cells = <1>; + }; }; adma_subsys: bus@59000000 {
@@ -410,4 +417,24 @@ #size-cells = <1>; ranges = <0x5f000000 0x0 0x5f000000 0x1000000>; }; + + thermal_zones: thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens 355>; + trips { + cpu_alert0: trip0 { + temperature = <107000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <127000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; };
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel