Thread (24 messages) 24 messages, 4 authors, 2018-12-15
STALE2746d
Revisions (7)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 current
  5. v5 [diff vs current]
  6. v6 [diff vs current]
  7. v7 [diff vs current]

[PATCH v4 09/15] dt-bindings: timer: Document RDA8810PL SoC timer

From: Manivannan Sadhasivam <hidden>
Date: 2018-12-10 17:37:24
Also in: linux-devicetree, linux-serial, lkml
Subsystem: clocksource, clockevent drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Daniel Lezcano, Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Document RDA Micro RDA8810PL SoC timer.

Signed-off-by: Manivannan Sadhasivam <redacted>
---
 .../bindings/timer/rda,8810pl-timer.txt       | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
new file mode 100644
index 000000000000..4db542c9a0fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
@@ -0,0 +1,20 @@
+RDA Micro RDA8810PL Timer
+
+Required properties:
+- compatible      :  "rda,8810pl-timer"
+- reg             :  Offset and length of the register set for the device.
+- interrupts      :  Should contain two interrupts.
+- interrupt-names :  Should be "hwtimer", "ostimer".
+
+Example:
+
+		apb@20900000 {
+			compatible = "simple-bus";
+			...
+			timer@10000 {
+				compatible = "rda,8810pl-timer";
+				reg = <0x10000 0x1000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
+					     <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hwtimer", "ostimer";
+			};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help