[PATCH] pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11
From: Chen-Yu Tsai <hidden>
Date: 2018-12-04 09:05:09
Also in:
linux-gpio, lkml, stable
Subsystem:
arm/allwinner sunxi soc support, pin control subsystem, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Walleij, Linus Torvalds
Pin PH11 is used on various A83T board to detect a change in the OTG
port's ID pin, as in when an OTG host cable is plugged in.
The incorrect offset meant the gpiochip/irqchip was activating the wrong
pin for interrupts.
Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support")
Cc: <redacted>
Signed-off-by: Chen-Yu Tsai <redacted>
---
drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c
index 6624499eae72..4ada80317a3b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c@@ -568,7 +568,7 @@ static const struct sunxi_desc_pin sun8i_a83t_pins[] = { SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 1)), /* PH_EINT11 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 11)), /* PH_EINT11 */ }; static const struct sunxi_pinctrl_desc sun8i_a83t_pinctrl_data = {
--
2.20.0.rc1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel