[PATCH 4/5] usb: mtu3: enable SETUPENDISR interrupt
From: chunfeng.yun@mediatek.com (Chunfeng Yun)
Date: 2018-11-29 02:36:08
Also in:
linux-devicetree, linux-mediatek, linux-usb, lkml
Subsystem:
mediatek usb3 drd ip driver, the rest, usb subsystem · Maintainers:
Chunfeng Yun, Linus Torvalds, Greg Kroah-Hartman
If the controller receives a new SETUP during SETUP data stage, and will generate SETUPENDISR interrupt, the driver should abort the current SETUP command and process the new one. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- drivers/usb/mtu3/mtu3_core.c | 2 +- drivers/usb/mtu3/mtu3_gadget_ep0.c | 6 +++++- drivers/usb/mtu3/mtu3_hw_regs.h | 1 + 3 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 1ffc0bc31c1d..b6b20949d63a 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c@@ -484,7 +484,7 @@ void mtu3_ep0_setup(struct mtu3 *mtu) mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); /* Enable EP0 interrupt */ - mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR); + mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR); } static int mtu3_mem_alloc(struct mtu3 *mtu)
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 3c464d8ae023..7cb7ac980446 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c@@ -692,9 +692,13 @@ irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu) mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */ /* only handle ep0's */ - if (!(int_status & EP0ISR)) + if (!(int_status & (EP0ISR | SETUPENDISR))) return IRQ_NONE; + /* abort current SETUP, and process new one */ + if (int_status & SETUPENDISR) + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + csr = mtu3_readl(mbase, U3D_EP0CSR); dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr);
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index a45bb253939f..d11fcd64c19d 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h@@ -104,6 +104,7 @@ /* U3D_EPISR */ #define EPRISR(x) (BIT(16) << (x)) +#define SETUPENDISR BIT(16) #define EPTISR(x) (BIT(0) << (x)) #define EP0ISR BIT(0)
--
2.19.1