[PATCH 14/15] ARM: dts: sun8i: r40: Add RTC device node
From: Chen-Yu Tsai <hidden>
Date: 2018-11-28 09:30:42
Also in:
linux-clk, linux-devicetree, linux-rtc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The R40 has an RTC hardware block, which has additional registers that are not related to RTC or clock functions, and is otherwise compatible with the H3's RTC. Add a device node for it, and fix up any references to the LOSC. Signed-off-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun8i-r40.dtsi | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index a8917f8b1c80..89762dbefe42 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi@@ -70,7 +70,7 @@ compatible = "fixed-clock"; clock-frequency = <32768>; clock-accuracy = <20000>; - clock-output-names = "osc32k"; + clock-output-names = "ext-osc32k"; }; };
@@ -315,17 +315,27 @@ ccu: clock at 1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; + rtc: rtc at 1c20400 { + compatible = "allwinner,sun8i-r40-rtc", + "allwinner,sun8i-h3-rtc"; + reg = <0x01c20400 0x400>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k", "osc32k-out"; + clocks = <&osc32k>; + #clock-cells = <1>; + }; + pio: pinctrl at 1c20800 { compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller;
--
2.20.0.rc1