[RFC PATCH v3 04/17] dt-bindings: interrupt-controller: Add suniv interrupt-controller
From: Mesih Kilinc <hidden>
Date: 2018-11-21 18:31:53
Also in:
linux-clk, linux-devicetree, linux-gpio, lkml
Subsystem:
irqchip drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add compatible string for Alwinner suniv F1C100s SoC interrupt controller which is stripped version of sun4i Signed-off-by: Mesih Kilinc <redacted> --- .../devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
index b290ca1..4043525 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt@@ -2,7 +2,9 @@ Allwinner Sunxi Interrupt Controller Required properties: -- compatible : should be "allwinner,sun4i-a10-ic" +- compatible : should be one of the following: + "allwinner,sun4i-a10-ic" + "allwinner,suniv-f1c100s-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an
--
2.7.4