Mark the state for devfreq device while entring suspend/resume process.

The patch draws on Tobias Jakobi's work posted ~2 years ago, who tried to
solve issue with devfreq device's frequency during suspend/resume.
During the discussion on LKML some corner cases and comments appeared
related to the design. This patch address them keeping in mind suggestions
from Chanwoo Choi.

Suggested-by: Tobias Jakobi <redacted>
Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lukasz Luba <redacted>
---
 arch/arm/boot/dts/exynos4210.dtsi | 2 ++
 arch/arm/boot/dts/exynos4412.dtsi | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b6091c2..4429b72 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi

@@ -298,6 +298,7 @@
 			opp-400000000 {
 				opp-hz = /bits/ 64 <400000000>;
 				opp-microvolt = <1150000>;
+				opp-suspend;
 			};
 		};
 

@@ -367,6 +368,7 @@
 			};
 			opp-200000000 {
 				opp-hz = /bits/ 64 <200000000>;
+				opp-suspend;
 			};
 		};
 	};

diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 51f72f0..908c0c4 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi

@@ -432,6 +432,7 @@
 			opp-400000000 {
 				opp-hz = /bits/ 64 <400000000>;
 				opp-microvolt = <1050000>;
+				opp-suspend;
 			};
 		};
 

@@ -520,6 +521,7 @@
 			opp-200000000 {
 				opp-hz = /bits/ 64 <200000000>;
 				opp-microvolt = <1000000>;
+				opp-suspend;
 			};
 		};
 

-- 
2.7.4