[PATCH 2/3] ARM: OMAP1: ams-delta: Drop unused symbols from the board header
From: jmkrzyszt@gmail.com (Janusz Krzysztofik)
Date: 2018-11-07 20:16:21
Also in:
linux-gpio, linux-omap, lkml
Subsystem:
arm port, omap1 support, the rest · Maintainers:
Russell King, Aaro Koskinen, Janusz Krzysztofik, Linus Torvalds
Those bitmap symbols defining pins of latch2 register, used with read()/write() calls before the latch was converted to a GPIO device, have been obsoleted by integer symbols defined inside the board file. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> --- arch/arm/mach-omap1/board-ams-delta.h | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.h b/arch/arm/mach-omap1/board-ams-delta.h
index 06e4c64a47f8..2c3aff824cf0 100644
--- a/arch/arm/mach-omap1/board-ams-delta.h
+++ b/arch/arm/mach-omap1/board-ams-delta.h@@ -28,10 +28,6 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 -#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 - #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 #define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 #define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
--
2.16.4