Thread (29 messages) 29 messages, 5 authors, 2018-10-30

[PATCH V3 7/8] arm64: dts: imx: add imx8qxp mek support

From: robh@kernel.org (Rob Herring)
Date: 2018-10-18 20:27:40
Also in: linux-devicetree

On Thu, Oct 18, 2018 at 06:19:43PM +0000, A.s. Dong wrote:
quoted hunk ↗ jump to hunk
i.MX 8QuadXPlus is a quad (4x) Cortex-A35 proccessor with powerful
graphic and multimedia features. This patch adds imx8qxp mek board
support.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree at vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <redacted>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
v2->v3:
 * Pad names update
 * move memory node to here
 * add no-sd and no-sdio under emmc node
---
 Documentation/devicetree/bindings/arm/fsl.txt |   4 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 141 ++++++++++++++++++++++++++
 3 files changed, 146 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index baeb1fc..704472b 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -97,6 +97,10 @@ i.MX7 SabreSD Board
 Required root node properties:
     - compatible = "fsl,imx7d-sdb", "fsl,imx7d";
 
+i.MX8QXP MEK Board
+Required root node properties:
+    - compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
+
 Generic i.MX boards
 -------------------
 
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 86e18ad..cff87f3 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_SOC_IMX8QXP) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
new file mode 100644
index 0000000..6087ead
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017~2018 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/ {
+	model = "Freescale i.MX8QXP MEK";
+	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
+
+	chosen {
+		stdout-path = &dma_lpuart0;
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_usdhc2_vmmc: usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&dma_lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy at 0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			at803x,eee-disabled;
+			at803x,vddio-1p8v;
These 2 are Not documented.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help