This patch adds support for new flash which indicates
that trip point triggers irq when temperature is met.
Exynos5433 supports 8 trip point which will trigger irq.
Above that number other trip points should be registered
without 'irq-mode' flag.
That will force the thermal framework to start polling
the temperature sensor under configured conditions and
handle the trip point.
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Signed-off-by: Lukasz Luba <redacted>
---
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 40 +++++++++++++++-------
1 file changed, 28 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 96e281c..dbce706ed 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -59,22 +59,26 @@
cpu0_alert0: cpu-alert-0 {
temperature = <50000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu0_alert1: cpu-alert-1 {
temperature = <60000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu0_alert2: cpu-alert-2 {
temperature = <70000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu0_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
+ irq-mode;
};
/*
* Exynos542x supports only 4 trip-points@@ -142,22 +146,26 @@
cpu1_alert0: cpu-alert-0 {
temperature = <50000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu1_alert1: cpu-alert-1 {
temperature = <60000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu1_alert2: cpu-alert-2 {
temperature = <70000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu1_crit0: cpu-crit-0 {
temperature = <120000>;
hysteresis = <0>;
type = "critical";
+ irq-mode;
};
cpu1_alert3: cpu-alert-3 {
temperature = <70000>;@@ -209,22 +217,26 @@
cpu2_alert0: cpu-alert-0 {
temperature = <50000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu2_alert1: cpu-alert-1 {
temperature = <60000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu2_alert2: cpu-alert-2 {
temperature = <70000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu2_crit0: cpu-crit-0 {
temperature = <120000>;
hysteresis = <0>;
type = "critical";
+ irq-mode;
};
cpu2_alert3: cpu-alert-3 {
temperature = <70000>;@@ -276,22 +288,26 @@
cpu3_alert0: cpu-alert-0 {
temperature = <50000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu3_alert1: cpu-alert-1 {
temperature = <60000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu3_alert2: cpu-alert-2 {
temperature = <70000>;
hysteresis = <5000>;
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu3_crit0: cpu-crit-0 {
temperature = <120000>;
hysteresis = <0>;
type = "critical";
+ irq-mode;
};
cpu3_alert3: cpu-alert-3 {
temperature = <70000>;--
2.7.4