[PATCH 6/6] arm64: dts: xilinx: ultra96: Standardize LED labels and triggers
From: Michal Simek <hidden>
Date: 2018-10-10 07:41:00
Also in:
linux-devicetree, linux-rockchip, lkml
On 9.10.2018 16:05, Manivannan Sadhasivam wrote:
quoted hunk ↗ jump to hunk
For all 96Boards, the following standard is used for onboard LEDs. device-name:green:user1 default-trigger: heartbeat device-name:green:user2 default-trigger: mmc0/disk-activity (onboard-storage) device-name:green:user3 default-trigger: mmc1 (SD-card) device-name:green:user4 default-trigger: none, panic-indicator device-name:yellow:wlan default-trigger: phy0tx device-name:blue:bt default-trigger: hci0-power So lets adopt the same for Ultra96, which is one of the 96Boards CE and AI platform. Since the WLAN and BT LEDs are hardwired onboard, consolidate only User LEDs. Signed-off-by: Manivannan Sadhasivam <redacted> --- arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index eb5e8bddb610..565ceb390f99 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts@@ -57,29 +57,30 @@ leds { compatible = "gpio-leds"; ds2 { - label = "ds2"; + label = "zynqmp-zcu100-revC:green:user1";
The purpose of this series should be standardize Led labels that's why I would expect that leds will be called in the same way on all these boards that's why I am not getting why there is board name. green:user1 or just user1 should be enough. Thanks, Michal