[PATCH v2 04/29] clk: sunxi-ng: h6: Set video PLLs limits
From: Jernej Skrabec <hidden>
Date: 2018-10-07 09:39:33
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
Subsystem:
arm/allwinner sunxi soc support, common clk framework, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Michael Turquette, Stephen Boyd, Linus Torvalds
Video PLL factors can be set in a way that final PLL rate is outside stable range. H6 user manual specifically says that N factor should not be below 12. While it doesn't says anything about maximum stable rate, it is clear that PLL doesn't work at 6.096 GHz (254 * 24 MHz). Set minimum allowed PLL video rate to 288 MHz (12 * 24 MHz) and maximum to 2.4 GHz, which is maximum in BSP driver. Signed-off-by: Jernej Skrabec <redacted> --- drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index 2193e1495086..19ff09f610e4 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c@@ -120,6 +120,8 @@ static struct ccu_nm pll_video0_clk = { .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ .fixed_post_div = 4, + .min_rate = 288000000, + .max_rate = 2400000000UL, .common = { .reg = 0x040, .features = CCU_FEATURE_FIXED_POSTDIV,
@@ -136,6 +138,8 @@ static struct ccu_nm pll_video1_clk = { .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ .fixed_post_div = 4, + .min_rate = 288000000, + .max_rate = 2400000000UL, .common = { .reg = 0x048, .features = CCU_FEATURE_FIXED_POSTDIV,
--
2.19.0