[PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc
From: j-keerthy@ti.com (Keerthy)
Date: 2018-09-25 05:14:11
Also in:
linux-devicetree, linux-omap
On Tuesday 25 September 2018 05:35 AM, Tony Lindgren wrote:
Hi all,
Here are four patches to make am437x and am335x l4 devices to probe with
ti-sysc driver similar to what we've already done for omap4. The related
legacy hwmod platform data will be removed few merge cycles later.
There are still dependencies to Tero's clkctrl changes and for ti-sysc
drivers changes. So these patches are based on on v4.19-rc3 merged with
my omap-for-v4.20/dt branch plus the following additional series of
patches:
[PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
[PATCH 0/3] ARM: dts: am3/am4/dra7 clkctrl data conversion
[PATCH 0/4] TI sysc driver updates for am335x and am437x
v4.19-rc3 is needed for commit 18eb8aea7fb2 ("net: ethernet:
cpsw-phy-sel: prefer phandle for phy sel") and omap-for-v4.20/dt
is needed to avoid conflicts with clean-up.
I've also pushed out a temporary testing branch for people to test
as omap-for-v4.20/dt-ti-sysc-tmp-testing [0][1].
Regards,
Tony
[0] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git omap-for-v4.20/dt-ti-sysc-tmp-testing
[1] https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v4.20/dt-ti-sysc-tmp-testingHi Tony, I tried Branch [1] above. AM335x-boneblack is doing all good with ds0. AM437x-gp the following is happening: https://pastebin.ubuntu.com/p/fmZNYgJ9Sp/ There seems to be a timeout due to which resume is not immediate i see 1-2s delay and i see i2c timeout. [ 402.247271] omap_i2c 4802a000.i2c: controller timed out [ 402.247441] pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110 [ 402.247486] pixcir_ts 1-005c: Failed to disable interrupt generation: -110 [ 402.247522] pixcir_ts 1-005c: Failed to stop [ 402.247607] dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98 [pixcir_i2c_ts] returns -110 so pixcir_i2c_ts_resume is retuning -110 which is timeout error code. I did some touch screen testing after DS0 resume seems to be working. Everything is in pastebin link provided above. Regards, Keerthy
Tony Lindgren (4): ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc arch/arm/boot/dts/am335x-shc.dts | 2 +- arch/arm/boot/dts/am33xx-l4.dtsi | 2132 +++++++++++++++++++++++++ arch/arm/boot/dts/am33xx.dtsi | 623 +------- arch/arm/boot/dts/am4372.dtsi | 876 +---------- arch/arm/boot/dts/am437x-l4.dtsi | 2499 ++++++++++++++++++++++++++++++ 5 files changed, 4651 insertions(+), 1481 deletions(-) create mode 100644 arch/arm/boot/dts/am33xx-l4.dtsi create mode 100644 arch/arm/boot/dts/am437x-l4.dtsi