[PATCH v4 1/2] dt-bindings: nand: meson: add Amlogic NAND controller driver
flat view
From: robh@kernel.org (Rob Herring)
Date: 2018-09-27 18:16:58
Also in:
linux-amlogic, linux-devicetree, lkml
On Thu, Sep 20, 2018 at 04:50:48PM +0800, Jianxin Pan wrote:
quoted hunk ↗ jump to hunk
From: Liang Yang <liang.yang@amlogic.com> Add Amlogic NAND controller dt-bindings for Meson SoC, Current this driver support GXBB/GXL/AXG platform. Signed-off-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Yixun Lan <redacted> --- .../devicetree/bindings/mtd/amlogic,meson-nand.txt | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txtdiff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt new file mode 100644 index 0000000..803df2a --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt@@ -0,0 +1,60 @@ +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs + +This file documents the properties in addition to those available in +the MTD NAND bindings. + +Required properties: +- compatible : contains one of: + - "amlogic,meson-gxl-nfc" + - "amlogic,meson-axg-nfc" +- clocks : + A list of phandle + clock-specifier pairs for the clocks listed + in clock-names. + +- clock-names: Should contain the following: + "core" - NFC module gate clock + "device" - device clock from eMMC sub clock controller + +- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC + controller port C + +Optional children nodes: +Children nodes represent the available nand chips. + +Other properties: +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. + +Example demonstrate on AXG SoC: + + sd_emmc_c_clkc: mmc at 7000 { + compatible = "amlogic,meson-axg-mmc-clkc", "syscon"; + reg = <0x0 0x7000 0x0 0x800>; + status = "okay"; + }; + + nand: nfc at 7800 {
nand-controller at 7800
quoted hunk ↗ jump to hunk
+ compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x7800 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + + clocks = <&clkc CLKID_SD_EMMC_C>, + <&sd_emmc_c_clkc CLKID_MMC_DIV>; + clock-names = "core", "device"; + amlogic,mmc-syscon = <&sd_emmc_c_clkc>; + + status = "okay";
Don't show status in examples, plus you have it twice.
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins>;
+
+ nand at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-on-flash-bbt;
+ };
+ };
--
1.9.1