[PATCH 2/2] arm64: dts: marvell: armada-cp110: describe more PPv2 interrupts
From: gregory.clement@bootlin.com (Gregory CLEMENT)
Date: 2018-09-26 12:30:24
Also in:
lkml
Hi Antoine, On lun., sept. 24 2018, Antoine Tenart [off-list ref] wrote:
This patch describes 3 additional interrupts per PPv2 port. Those interrupts will be used later in future versions of the Marvell PPv2 driver, and now the device tree description matches the hardware capabilities. Signed-off-by: Antoine Tenart <redacted>
Applied on mvebu/dt64 Thanks, Gregory
quoted hunk
--- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 21 ++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 6a13690cf1e4..26d6e602d1ec 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi@@ -52,9 +52,14 @@ <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "link"; + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <0>; gop-port-id = <0>; status = "disabled";@@ -66,9 +71,14 @@ <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "link"; + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <1>; gop-port-id = <2>; status = "disabled";@@ -80,9 +90,14 @@ <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "link"; + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <2>; gop-port-id = <3>; status = "disabled";-- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com