Thread (1 message) 1 message, 1 author, 2018-09-26

[PATCH 1/2] arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names

From: gregory.clement@bootlin.com (Gregory CLEMENT)
Date: 2018-09-26 12:30:13
Also in: lkml

Hi Antoine,
 
 On lun., sept. 24 2018, Antoine Tenart [off-list ref] wrote:
This patch changes the PPv2 IRQ names in the CP110 device tree to match
a corresponding change in the Marvell PPv2 driver. The reason this was
updated is the IRQ where names after Tx/Rx interrupts, but this is not
true and can be configured. A following patch will add more of them and
the names wouldn't make sense.

Signed-off-by: Antoine Tenart <redacted>
Applied on mvebu/dt64

Thanks,

Gregory
quoted hunk
---
 arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 840c8454d03e..6a13690cf1e4 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -53,8 +53,8 @@
 					<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-					"tx-cpu3", "rx-shared", "link";
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "link";
 				port-id = <0>;
 				gop-port-id = <0>;
 				status = "disabled";
@@ -67,8 +67,8 @@
 					<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-					"tx-cpu3", "rx-shared", "link";
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "link";
 				port-id = <1>;
 				gop-port-id = <2>;
 				status = "disabled";
@@ -81,8 +81,8 @@
 					<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-					"tx-cpu3", "rx-shared", "link";
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "link";
 				port-id = <2>;
 				gop-port-id = <3>;
 				status = "disabled";
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help