[PATCH v7 4/7] edac: synopsys: Add macro defines for ZynqMP DDRC
From: bp@alien8.de (Borislav Petkov)
Date: 2018-09-24 09:22:26
Also in:
linux-devicetree, linux-edac, lkml
On Mon, Sep 17, 2018 at 07:55:02PM +0530, Manish Narani wrote:
quoted hunk ↗ jump to hunk
Add macro defines for ZynqMP DDR controller. These macros will be used for ZyqnMP ECC operations. Signed-off-by: Manish Narani <redacted> --- drivers/edac/synopsys_edac.c | 168 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 168 insertions(+)diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c index eb458e5..6bf7959 100644 --- a/drivers/edac/synopsys_edac.c +++ b/drivers/edac/synopsys_edac.c@@ -97,6 +97,174 @@ #define SCRUB_MODE_MASK 0x7 #define SCRUB_MODE_SECDED 0x4 +/* DDR ECC Quirks */ +#define DDR_ECC_INTR_SUPPORT BIT(0) +#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
All those new additions are one column further to the left than the old
ones. Why?
Is there some significance here or can they all be vertically aligned?
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.