Thread (7 messages) 7 messages, 2 authors, 2018-09-19

[PATCH 0/4] Add i.MX6ULZ SoC support

From: Anson Huang <hidden>
Date: 2018-09-19 06:10:24
Also in: linux-clk, linux-devicetree, lkml

Hi, Stefan

Anson Huang
Best Regards!

-----Original Message-----
From: Stefan Wahren <redacted>
Sent: Tuesday, September 18, 2018 3:38 PM
To: Anson Huang <redacted>; robh+dt at kernel.org;
mark.rutland at arm.com; shawnguo at kernel.org; s.hauer at pengutronix.de;
kernel at pengutronix.de; Fabio Estevam [off-list ref];
linux at armlinux.org.uk; mturquette at baylibre.com; sboyd at kernel.org; Jacky
Bai [off-list ref]; A.s. Dong [off-list ref];
devicetree at vger.kernel.org; linux-kernel at vger.kernel.org;
linux-arm-kernel at lists.infradead.org; linux-clk at vger.kernel.org
Cc: dl-linux-imx <redacted>
Subject: Re: [PATCH 0/4] Add i.MX6ULZ SoC support

Hi Anson,

Am 18.09.2018 um 08:19 schrieb Anson Huang:
quoted
This patch set adds i.MX6ULZ SoC support, i.MX6ULZ is a new SoC of
i.MX6 family, compared to i.MX6ULL, it removes below modules:

    - UART5/UART6/UART7/UART8;
    - PWM5/PWM6/PWM7/PWM8;
    - eCSPI3/eCSPI4;
    - CAN1/CAN2;
    - FEC1/FEC2;
    - I2C3/I2C4;
    - EPIT2;
    - LCDIF;
    - GPT2;
    - TSC;

And i.MX6ULZ has same soc_id as i.MX6ULL, but SRC_SBMR2 bit[6] is to
differentiate i.MX6ULZ from i.MX6ULL, 1'b1 means i.MX6ULZ and
1'b0 means i.MX6ULL. i.MX6ULZ reuse most of i.MX6UL/i.MX6ULL code,
just add the new CPU type and remove those non-exist modules from dtb.

Anson Huang (4):
  ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
  ARM: imx: add i.mx6ulz msl support
  clk: imx6ul: add i.mx6ulz support
  dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
i recommend the following patch order:
ARM: imx: add i.mx6ulz msl support
clk: imx6ul: add i.mx6ulz support
dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support

Stefan
 
Thanks, I resend the V2 patch set with the patch order you recommended.

Anson.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help