[PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property
From: shawnguo@kernel.org (Shawn Guo)
Date: 2018-09-12 01:06:24
Also in:
linux-clk, linux-devicetree, lkml
I updated the subject as below to make it clear this is a bindings change. dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property Patch applied, thanks. Shawn On Thu, Aug 02, 2018 at 12:34:20PM +0200, Oleksij Rempel wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++ 1 file changed, 8 insertions(+)diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index a45ca67a9d5f..e1308346e00d 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt@@ -6,6 +6,14 @@ Required properties: - interrupts: Should contain CCM interrupt - #clock-cells: Should be <1> +Optional properties: +- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal + on power off. + Use this property if the SoC should be powered off by external power + management IC (PMIC) triggered via PMIC_STBY_REQ signal. + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should + be using "syscon-poweroff" driver instead. + The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h for the full list of i.MX6 Quad and DualLite clock IDs.-- 2.18.0