Thread (11 messages) 11 messages, 2 authors, 2018-09-10

[RESEND PATCH v2 2/3] mtd: spi-nor: parse SFDP Sector Map Parameter Table

From: Tudor Ambarus <hidden>
Date: 2018-09-07 09:10:45
Also in: lkml


On 09/03/2018 08:40 PM, Marek Vasut wrote:
On 08/27/2018 12:26 PM, Tudor Ambarus wrote:
[...]
quoted
+static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt)
+{
+	const u32 *ret = NULL;
+	u32 i, addr;
+	int err;
+	u8 addr_width, read_opcode, read_dummy;
+	u8 read_data_mask, data_byte, map_id;
+
+	addr_width = nor->addr_width;
+	read_dummy = nor->read_dummy;
+	read_opcode = nor->read_opcode;
+
+	map_id = 0;
+	i = 0;
+	/* Determine if there are any optional Detection Command Descriptors */
+	while (!(smpt[i] & SMPT_DESC_TYPE_MAP)) {
+		read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
+		nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
+		nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
+		nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
+		addr = smpt[i + 1];
+
+		err = spi_nor_read_raw(nor, addr, 1, &data_byte);
+		if (err)
+			goto out;
+
+		/*
+		 * Build an index value that is used to select the Sector Map
+		 * Configuration that is currently in use.
+		 */
+		map_id = map_id << 1 | (!(data_byte & read_data_mask) ? 0 : 1);
You can drop the ternary operator part completely ^
I'll use !! instead.
quoted
+		i = i + 2;
+	}
+
+	/* Find the matching configuration map */
+	while (SMPT_MAP_ID(smpt[i]) != map_id) {
+		if (smpt[i] & SMPT_DESC_END)
+			goto out;
+		/* increment the table index to the next map */
+		i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
+	}
+
+	ret = smpt + i;
+	/* fall through */
+out:
+	nor->addr_width = addr_width;
+	nor->read_dummy = read_dummy;
+	nor->read_opcode = read_opcode;
+	return ret;
+}
+
+static void
+spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
+			     const struct spi_nor_erase_type *erase,
+			     const u8 erase_type)
+{
+	int i;
+
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		if (!(erase_type & BIT(i)))
+			continue;
+		if (region->size & erase[i].size_mask) {
+			spi_nor_region_mark_overlay(region);
+			return;
+		}
+	}
+}
+
+static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
+					      const u32 *smpt)
+{
+	struct spi_nor_erase_map *map = &nor->erase_map;
+	const struct spi_nor_erase_type *erase = map->erase_type;
+	struct spi_nor_erase_region *region;
+	u64 offset;
+	u32 region_count;
+	int i, j;
+	u8 erase_type;
+
+	region_count = SMPT_MAP_REGION_COUNT(*smpt);
+	region = devm_kcalloc(nor->dev, region_count, sizeof(*region),
+			      GFP_KERNEL);
Is this memory always correctly free'd ?
Yes. It will be free'd when the driver detaches from the device.

Thanks,
ta
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help