[PATCH v5 04/14] irqchip/irq-mvebu-icu: clarify the reset operation of configured interrupts
From: miquel.raynal@bootlin.com (Miquel Raynal)
Date: 2018-08-30 07:35:25
Also in:
linux-devicetree
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, irqchip drivers, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Thomas Gleixner, Linus Torvalds
Rewrite a small section to clarify the reset operation of interrupts already configured by ATF that we want to handle in the driver. This will simplify the introduction of System Error Interrupts support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> --- drivers/irqchip/irq-mvebu-icu.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c
index a2a3acd74491..0f2655d7f19e 100644
--- a/drivers/irqchip/irq-mvebu-icu.c
+++ b/drivers/irqchip/irq-mvebu-icu.c@@ -258,8 +258,12 @@ static int mvebu_icu_probe(struct platform_device *pdev) * avoid unpredictable SPI assignments done by firmware. */ for (i = 0 ; i < ICU_MAX_IRQS ; i++) { - u32 icu_int = readl_relaxed(icu->base + ICU_INT_CFG(i)); - if ((icu_int >> ICU_GROUP_SHIFT) == ICU_GRP_NSR) + u32 icu_int, icu_grp; + + icu_int = readl_relaxed(icu->base + ICU_INT_CFG(i)); + icu_grp = icu_int >> ICU_GROUP_SHIFT; + + if (icu_grp == ICU_GRP_NSR) writel_relaxed(0x0, icu->base + ICU_INT_CFG(i)); }
--
2.17.1