[PATCH 2/2] ARM: dts: add Raspberry Pi Compute Module 3 and IO board

Hi Florian,

Stefan Wahren [off-list ref] hat am 4. August 2018 um 13:10 geschrieben:
 

The Raspberry Pi Compute Module 3 (CM3) and the Raspberry Pi
Compute Module 3 Lite (CM3L) are SoMs which contains a BCM2837 processor,
1 GB RAM and a GPIO expander. The CM3 has a 4 GB eMMC, but on the CM3L
the eMMC is unpopulated and it's up to the user to connect their
own SD/MMC device. The dtsi file is designed to work for both modules.
There is also a matching carrier board which is called
Compute Module IO Board V3.

Signed-off-by: Stefan Wahren <redacted>
---
 arch/arm/boot/dts/Makefile                         |  1 +
 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts          | 87 ++++++++++++++++++++++
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi             | 52 +++++++++++++
 arch/arm64/boot/dts/broadcom/Makefile              |  3 +-
 .../boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts      |  2 +

oops, i mixed arm and arm64 within this patch. I will send a new version.

Stefan