[PATCH v2 2/3] dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
From: robh@kernel.org (Rob Herring)
Date: 2018-08-29 01:05:04
Also in:
linux-devicetree, lkml
On Tue, Aug 28, 2018 at 10:54:19AM -0700, Florian Fainelli wrote:
quoted hunk ↗ jump to hunk
Document the Broadcom roboswitch Switch Register Access Block interrupt lines and additional register base addresses for port mux configuration and SGMII status/configuration registers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- .../devicetree/bindings/net/dsa/b53.txt | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+)diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt index 1811e1972a7a..5f1029e853b8 100644 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt@@ -46,6 +46,29 @@ Required properties: "brcm,bcm6328-switch" "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" +Required properties for BCM585xx/586xx/88312 SoCs: + + - reg: a total of 3 register base addresses, the first one must be the + Switch Register Access block base, the second is the port 5/4 mux + configuration register and the third one is the SGMII configuration + and status register base address. + + - interrupts: a total of 13 interrupts must be specified, in the following + order: port 0-5, 7-8 link status change, then the integrated PHY interrupt, + then the timestamping interrupt and the sleep timer interrupts for ports + 5,7,8.
Bulleted lists would be easier to read.
+ +Optional properties for BCM585xx/586xx/88312 SoCs: + + - reg-names: a total of 3 names matching the 3 base register address, must + be "srab", "mux_config" and "sgmii_config";
Here too, one per line please.
+ + - interrupt-names: a total of 13 names matching the 13 interrupts specified + must be: "link_state_p0", "link_state_p1", "link_state_p2", + "link_state_p3", "link_state_p4", "link_state_p5", "link_state_p7", + "link_state_p8", "phy", "ts", "imp_sleep_timer_p5", "imp_sleep_timer_p7", + "imp_sleep_timer_p8" + See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. -- 2.17.1