Thread (70 messages) 70 messages, 6 authors, 2018-11-28
STALE2747d
Revisions (7)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v4 current
  6. v4 [diff vs current]
  7. v4 [diff vs current]

[PATCH v5 4/4] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support.

From: Jan Tuerk <hidden>
Date: 2018-08-22 15:52:14
Also in: linux-devicetree, lkml
Subsystem: arm port, the rest · Maintainers: Russell King, Linus Torvalds

All recent emtrion modules based on i.mx6 make use of the DA0963.
Therefore enable it with the following defaults:
	- CONFIG_MFD_DA9063=y
	- CONFIG_REGULATOR_DA9063=y
	- CONFIG_DA9063_WATCHDOG=m
MFD and REGULATOR are built-in to have it at Kernel boot-time.
The WATCHDOG is optional and could be loaded from userspace.

Signed-off-by: Jan Tuerk <redacted>
---
 arch/arm/configs/imx_v6_v7_defconfig | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 200ebda47e0c..736c5ed3fd9b 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -219,10 +219,12 @@ CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_DA9062_WATCHDOG=y
+CONFIG_DA9063_WATCHDOG=m
 CONFIG_RN5T618_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_DA9052_I2C=y
 CONFIG_MFD_DA9062=y
+CONFIG_MFD_DA9063=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_MFD_RN5T618=y
@@ -232,6 +234,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_DA9062=y
+CONFIG_REGULATOR_DA9063=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
-- 
2.18.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help