[PATCH v3 3/7] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port
From: jmkrzyszt@gmail.com (Janusz Krzysztofik)
Date: 2018-08-13 22:34:46
Also in:
linux-gpio, linux-omap, lkml
Subsystem:
arm port, omap1 support, the rest · Maintainers:
Russell King, Aaro Koskinen, Janusz Krzysztofik, Linus Torvalds
Data port used by Amstrad Delta NAND driver is actually an OMAP MPUIO device, already under control of gpio-omap driver. The NAND driver gets access to the port by ioremapping it and performs read/write operations. That is done without any proteciton from other users legally manipulating the port pins over GPIO API. The plan is to convert the driver to access the port over GPIO consumer API. Before that is implemented, the driver can already obtain exclusive access to the port by requesting an array of its GPIO descriptors. Add respective entries to the NAND GPIO lookup table. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <redacted> Reviewed-by: Linus Walleij <redacted> --- arch/arm/mach-omap1/board-ams-delta.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index eedacdfe9725..16f7bbe47607 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c@@ -337,7 +337,8 @@ static struct platform_device ams_delta_nand_device = { .resource = ams_delta_nand_resources, }; -#define OMAP_GPIO_LABEL "gpio-0-15" +#define OMAP_GPIO_LABEL "gpio-0-15" +#define OMAP_MPUIO_LABEL "mpuio" static struct gpiod_lookup_table ams_delta_nand_gpio_table = { .table = {
@@ -349,6 +350,14 @@ static struct gpiod_lookup_table ams_delta_nand_gpio_table = { GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", 0), GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0), GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 0, "data", 0, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 1, "data", 1, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 2, "data", 2, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 3, "data", 3, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 4, "data", 4, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 5, "data", 5, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 6, "data", 6, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 7, "data", 7, 0), { }, }, };
--
2.16.4