[PATCH v2] media: i2c: lm3560: use conservative defaults

On Sat, Aug 11, 2018 at 9:10 AM, Daniel Jeong [off-list ref] wrote:

Hi Pavel,

I think if there is not exist pdata, it should be set to the value of power
on reset (POR) to sync with the chip.

According to the LM3560 datasheet, Flash Timeout is 512ms, Flash current is
875mA and Torch Current is 93.75mA.

Can't we simple read back?

-- 
With Best Regards,
Andy Shevchenko