[PATCH 5/5] clk: sunxi-ng: a83t: Add max. rate constraint to video PLLs
From: Jernej Skrabec <hidden>
Date: 2018-08-09 16:52:47
Also in:
linux-clk, lkml
Subsystem:
arm/allwinner sunxi soc support, common clk framework, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Michael Turquette, Stephen Boyd, Linus Torvalds
It may happen that clock framework finds optimal video PLL rate above that which is really supported by HW. User manual doesn't really say what is upper limit for video PLLs on A83T. Because of that, use the maximum rate defined in BSP clk driver which is 3 GHz. Signed-off-by: Jernej Skrabec <redacted> --- drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
index 7d08015b980d..2d6555d73170 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c@@ -108,6 +108,7 @@ static struct ccu_nkmp pll_video0_clk = { .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0), .m = _SUNXI_CCU_DIV(16, 1), /* input divider */ .p = _SUNXI_CCU_DIV(0, 2), /* output divider */ + .max_rate = 3000000000UL, .common = { .reg = 0x010, .lock_reg = CCU_SUN8I_A83T_LOCK_REG,
@@ -220,6 +221,7 @@ static struct ccu_nkmp pll_video1_clk = { .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0), .m = _SUNXI_CCU_DIV(16, 1), /* input divider */ .p = _SUNXI_CCU_DIV(0, 2), /* external divider p */ + .max_rate = 3000000000UL, .common = { .reg = 0x04c, .lock_reg = CCU_SUN8I_A83T_LOCK_REG,
--
2.18.0