[dts] [v2] fix green/blue pio-led on bananapi-r2
From: matthias.bgg@gmail.com (Matthias Brugger)
Date: 2018-07-16 09:16:56
Also in:
linux-devicetree, linux-mediatek
On 25/06/18 12:05, Frank Wunderlich wrote:
From: Frank Wunderlich <redacted> Date: Mon, 25 Jun 2018 11:57:13 +0200 Subject: [PATCH] [dts] [v2] fix green/blue pio-led pio-leds (near GPIO-Header) are swapped and LOW-active patch restore this expected behaviour red cannot be switched afaik v2: alphabetic order
I fixed the commit message and pushed it to v4.18-next/dts32
quoted hunk
Signed-off-by: Frank Wunderlich <redacted> --- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 531d905d924ff..2b760f90f38c8 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts@@ -91,19 +91,19 @@ blue { label = "bpi-r2:pio:blue"; - gpios = <&pio 241 GPIO_ACTIVE_HIGH>; + gpios = <&pio 240 GPIO_ACTIVE_LOW>; default-state = "off"; }; green { label = "bpi-r2:pio:green"; - gpios = <&pio 240 GPIO_ACTIVE_HIGH>; + gpios = <&pio 241 GPIO_ACTIVE_LOW>; default-state = "off"; }; red { label = "bpi-r2:pio:red"; - gpios = <&pio 239 GPIO_ACTIVE_HIGH>; + gpios = <&pio 239 GPIO_ACTIVE_LOW>; default-state = "off"; }; };? _______________________________________________ Linux-mediatek mailing list Linux-mediatek at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek