From: Levin Du <redacted>

Adding a GRF GPIO controller labled "grf_gpio" to rk3328, currently
providing access to the GPIO_MUTE pin, which is manupulated by the
GRF_SOC_CON10 register.

The GPIO_MUTE pin is referred to as <&grf_gpio 0>.

Signed-off-by: Levin Du <redacted>

---

Changes in v4:
- Use binding of "rockchip,rk3328-grf-gpio"

Changes in v3:
- Use dedicated "rockchip,rk3328-gpio-mute" driver

Changes in v2:
- Rename gpio_syscon10 to gpio_mute in rk3328.dtsi

Changes in v1:
- Split from V0 and add to rk3328.dtsi for general use.

 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 3f5a294..bf5656d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -275,6 +275,12 @@
 			mode-loader = <BOOT_BL_DOWNLOAD>;
 		};
 
+		grf_gpio: grf-gpio {
+			compatible = "rockchip,rk3328-grf-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
 	};
 
 	uart0: serial at ff110000 {

-- 
2.7.4