[PATCH v3 1/2] Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping"
From: Leonard Crestez <hidden>
Date: 2018-07-24 16:15:23
Also in:
linux-pci, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This reverts commit 1c86c9dd82f859b474474a7fee0d5195da2c9c1d. That commit followed the reference manual but unfortunately the imx7d manual is incorrect. Tested with ath9k pcie card and confirmed internally. Signed-off-by: Leonard Crestez <redacted> --- arch/arm/boot/dts/imx7d.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7cbc2ffa4b3a..7234e8330a57 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi@@ -124,14 +124,18 @@ num-lanes = <1>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + /* + * Reference manual lists pci irqs incorrectly + * Real hardware ordering is same as imx6: D+MSI, C, B, A + */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, <&clks IMX7D_PCIE_PHY_ROOT_CLK>; clock-names = "pcie", "pcie_bus", "pcie_phy"; assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
--
2.17.1