[PATCH v6 3/4] arm64: dts: dwc3: description of incr burst type
From: Pengbo Mu <hidden>
Date: 2018-07-23 10:33:03
Also in:
linux-devicetree, linux-usb, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
Add description of 'snps,incr-burst-type-adjustment' to binding so that configuring devicetree. Signed-off-by: Ran Wang <redacted> Signed-off-by: Pengbo Mu <redacted> --- Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 7f13ebe..3e4c38b 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt@@ -96,6 +96,11 @@ Optional properties: enable periodic ESS TX threshold. - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. + - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 + register, undefined length INCR burst type enable and INCRx type. + When just one value, which means INCRX burst mode enabled. When + more than one value, which means undefined length INCR burst type + enabled. The values can be 1, 4, 8, 16, 32, 64, 128 and 256. - in addition all properties from usb-xhci.txt from the current directory are supported as well
@@ -108,4 +113,5 @@ dwc3 at 4a030000 { reg = <0x4a030000 0xcfff>; interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; };
--
2.7.4