Hi Stephen and Mike,

On 17.7.2018 21:59, Jolly Shah wrote:

From: Jolly Shah <redacted>

This patch adds CCF compliant clock driver for ZynqMP.
Clock driver queries supported clock information from
firmware and regiters pll and output clocks with CCF.

Signed-off-by: Rajan Vaja <redacted>
Signed-off-by: Tejas Patel <redacted>
Signed-off-by: Shubhrajyoti Datta <redacted>
Signed-off-by: Jolly Shah <redacted>
---
 drivers/clk/Kconfig                  |   1 +
 drivers/clk/Makefile                 |   1 +
 drivers/clk/zynqmp/Kconfig           |  10 +
 drivers/clk/zynqmp/Makefile          |   4 +
 drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++++
 drivers/clk/zynqmp/clk-mux-zynqmp.c  | 141 +++++++
 drivers/clk/zynqmp/clk-zynqmp.h      |  68 ++++
 drivers/clk/zynqmp/clkc.c            | 719 +++++++++++++++++++++++++++++++++++
 drivers/clk/zynqmp/divider.c         | 217 +++++++++++
 drivers/clk/zynqmp/pll.c             | 335 ++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h |   1 +
 11 files changed, 1641 insertions(+)
 create mode 100644 drivers/clk/zynqmp/Kconfig
 create mode 100644 drivers/clk/zynqmp/Makefile
 create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c
 create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c
 create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h
 create mode 100644 drivers/clk/zynqmp/clkc.c
 create mode 100644 drivers/clk/zynqmp/divider.c
 create mode 100644 drivers/clk/zynqmp/pll.c

DT binding was reviewed by Stephen but I can't see any review for the
driver itself. Should I wait for your review or do you want to take
binding doc 09/10 and 10/10 separately or this can go via arm-soc tree?

Thanks,
Michal